MasterTune Moto Suite

PW50 Between Motos Checklist

This is your 20-minute refresh routine to keep the PW50 race-ready between motos or after heavy backyard thrashing. Don’t overthink it — just run down the list and trust the process.

Fast Wash Routine

Remove seat and rear fender Avoid spraying kill switch directly Use electric pressure washer only Focus on cleaning head & cylinder fins Lay bike over to reach bottom if needed Dry before touching air filter or carb

Air Filter Cleaning

Remove airbox and foam Clean using your preferred method Re-oil and reassemble properly Confirm fit and seal before reinstalling

Trackside Carb Clean

Clamp fuel line and remove carb Dump fuel and clean jets Blow out all circuits and passages Align slide cutout correctly when reinstalling

Ring Gear & Axle Check

Remove silencer and diff cover Remove axle and inspect splines Reassemble carefully Torque axle nut to 50 ft-lbs

Final Checks Before Next Ride

Air filter clean and seated Carb mounted tight Spark plug fresh and gapped Connectors dry, no water in seat foam Fuel turned ON